Innov-is XP3

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I Align the Embroidering Position (Using the Built-In Camera)?

 

 

 

Aligning the Embroidering Position Using the Built-In Camera

The camera built into this machine can be used to easily align the embroidering position. This is useful for patterns which need to be embroidered in a particular position as shown below.

image

 


 

  1. Use a chalk pencil to draw a cross at the desired embroidering location.
    image (1) Chalk pencil mark



     
  2. Hoop the fabric.

    image

     

  3. Select the pattern on your machine and press image .


     

     
  4. Press image in the embroidering screen.

    image



     
  5. Press image to set the starting point to the center of the pattern.

    image



     
  6. Press OK .




     
  7. Press the Presser Foot Lifter button to lower the embroidery foot.



     
  8. Press image .




     
  9. Press the positioning keys to move the embroidery frame until the cross-shaped chalk mark drawn on the fabric is displayed in the camera view window.
    image (1) Positioning keys



     
  10. Press image to display the grid lines.
    image (1) Grid lines
    (2) Chalk mark on the fabric

    Press image to enlarge the camera view. By enlarging the camera view, you can make a close adjustment for the center point of the pattern moving the embroidery frame little by little.




     
  11. Adjust the orientation of the pattern by pressing the orientation keys until the grid lines are parallel with the chalk mark drawn on the fabric.
    image (1) Center point of the pattern



     
  12. Press the positioning keys to move the embroidery frame until the center point of the pattern in the camera view window is aligned with the chalk mark drawn on the fabric.

    image

     

     
  13. Press OK to return to the previous screen.



     
  14. Press the Start/Stop button to begin embroidering.
     

▲TOP

 

 

 

Using the Embroidery Position Sticker to Align the Embroidering Position

The embroidering position can easily be aligned using the machine’s built-in camera and the included embroidery positioning sticker.

Depending on the type of fabric that is used, a part of the embroidery positioning sticker may remain attached when it is peeled off. Before using the embroidery positioning sticker, check that it can be cleanly removed from a scrap piece of the fabric to be used.

 

 

  1. Press image to display the editing window, and then press image .

    image




     
  2. Following message appears. Press OK .

    image
    >> The embroidering position will return to the original position, even if you changed before.


     

     
  3. Select the position you want to set as the reference point.

    image
    * Select image if you want to embroider referring the embroidery positioning sticker as the center of the pattern.



     

  4. Affix the embroidery positioning sticker to the location in the fabric to be embroidered. Place the embroidery positioning sticker so that the center of the larger circle is at the center or edge of the embroidery pattern.
    image

    (1) Embroidery positioning sticker

    (2) Center or edge of the embroidery pattern

    (3) Embroidery field




     
  5. Press image .

    image
    Attach embroidery foot "W" before pressing image . The embroidery foot "W" lowers and check the fabric thickness, to help the built-in camera recognize the embroidery positioning sticker.



     

  6. Following message appears. Press OK .

    image
    >> The built-in camera automatically searches for the embroidery positioning sticker, and then the carriage is moved so that the selected reference point of the embroidery pattern is aligned with the embroidery positioning sticker.

    If the following error message appears, press OK , rehoop the fabric so that the pattern is within the embroidery field, and then press image again.
    image





     
  7. A reminder message appears. Remove the embroidery positioning sticker from the fabric, and press OK .
    * To remove the embroidery positioning sticker more easily, press image so that the carriage moves slightly forward and away from under the needle. After the embroidery positioning sticker is removed, press OK .
     
    image image




     
  8. Press the Start/Stop button to begin embroidering.

    After the included embroidery positioning stickers are used up, optional stickers are available. For details, refer to the Operation Manual (Sewing).

▲TOP


 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is XP1, Innov-is XP3

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.