Innov-is XV
FAQs & Troubleshooting |
The machine stops and displays the error message "Fabric edge is not recognized at this point" while edge sewing, stitching is not reaching the edge of the fabric.
The built-in camera cannot detect the edge of the fabric and edge sewing is canceled for the following reasons.
1. | The machine was not able to detect the edge of the fabric correctly because your hand or something else covered the edge of the fabric. |
Touch "Close" to close the message. Then raise the presser foot and re-set the sewing position. Lower the presser foot and start sewing again.
| |
While edge sewing, do not place anything, including your hands near the edge of the fabric, in the recognition range. | |
2. | The machine was not able to detect the edge of the fabric correctly because the edge of the fabric has lint or loose threads. |
Before starting sewing, trim the edge of the fabric to get rid of any lint or loose threads.
| |
3. | The machine was not able to detect the edge of the fabric correctly because it came to a curve. |
Touch "Close" to close the message. Then raise presser foot and place the fabric square with the presser foot. Lower the presser foot and start sewing again. | |
Content Feedback
To help us improve our support, please provide your feedback below.