3034D
![]() |
FAQs & Troubleshooting |
How do I thread the Left needle?
Run the thread in the sequence illustrated, following the yellow colour and the numbers next to each threading point.
-
Pull the thread off the spool and directly up through the thread holder 1 and the thread plate 2 on the thread tree from back to front.
-
Pass the thread thourgh the hole 3 on the top of machine.
Pass the thread through the tension disc 4 which is in the channel next to the yellow tension adjustment dial.
-
Guide the thread down the channel and across through the threading points 5 6 7 next to the yellow colour marks following the numerical order in the accompanying illustration.
Make sure the thread is through the left of the separater <A>.
-
Bring the thread down through the needle bar thread guide and through the left needle 8 from front to back.
(<B>: two needles/ <C>: one needle)