XR-6600
![]() |
FAQs & Troubleshooting |
How do I draw up the lower thread?
1. | Raise the presser foot using the presser foot lever. |
| |
2. | Lightly hold the end of the upper thread. |
| |
3. | While holding the end of the upper thread, raise the needle either by turning the handwheel toward you (anti-clockwise) so that the mark on the wheel points up or by pressing needle position button (for models equipped with the needle position button) once or twice. |
![]() | |
| |
4. | Pull on the upper thread to draw up the lower thread. |
![]() | |
| |
5. | Pull out about 10 cm (4 inch) of both threads and pull them toward the back of the machine under the presser foot. |
![]() | |
|
Content Feedback
To help us improve our support, please provide your feedback below.