Innov-is NV800E

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 29/07/2016
  • ID: faqh00000244_002

"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?

This message is displayed when you try to recall or save a pattern while no USB flash drive is loaded.

Check the following possible problems.

  • Make sure that the USB flash drive is completely inserted into the USB port on the machine.
    If the USB flash drive is inserted, remove the USB flash drive from the USB port and reinsert it.
  • It may take a little time until the machine recognizes the USB flash drive. Wait a few seconds, and try again.

     

If the problem persists, use another USB flash drive.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is F440E, Innov-is F480, Innov-is F540E, Innov-is F560, Innov-is F580, Innov-is M230E, Innov-is M240ED, Innov-is M280D, Innov-is M330E, Innov-is M340ED, Innov-is M380D, Innov-is NV2600, Innov-is NV2650D, Innov-is NV2700, Innov-is NV2750D, Innov-is NV800E, Innov-is NV870SE, Innov-is NV880E

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit