Innov-is 2200

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I remove the presser foot holder?

 

  1. Press the "Needle Position" button to raise the needle.
    Press the "Needle Position" button
     
  2. Press key.

    If "OK to automatically lower the presser foot?" appears on the LCD screen, press OK to continue.
    The entire screen becomes white, and all keys and operation buttons are locked.

     

  3. Raise the presser foot lever.


     
  4. Press the black button on the presser foot holder and remove the presser foot.
    remove the presser foot



    1 Black button

    2 Presser foot holder
     

     

  5. Loosen the screw of the presser foot holder to remove the presser foot holder.
    remove the presser foot holder

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is 1500D/1500, Innov-is 2200, Innov-is 4000D/4000, Innov-is 5000, Innov-is I, Innov-is Ie, NX-2000, QC-1000

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.