SuperGalaxie 3000/3000C/3000D/3100D
FAQs & Troubleshooting |
Sometimes I insert a memory card or floppy disk, I touch the appropriate icon and the SG3000 screen blanks out then turns back on. Sometimes the designs come up, but when I choose a design, the screen blanks out.
- The SUPER GALAXIE 3000 is very sensitive to stitch data. If a design is not properly digitized, or if important portions of the design's stitch data are missing or corrupted, the machine will re-set itself.
- Run the design through the PE-Design software if possible and examine it.
- If another machine, such as the SUPER GALAXIE 2100, is available, send the design to a card and place it in the embroidery machine.
- Often the machines cannot display the colour name of the corrupt portion or a design and that will be an indication to you.
- Additionally, if there is too much data on the disk, the machine cannot process it all at one time.
- If you suspect there is too much data on the disk for the machine to read, place just a few of the designs onto a different floppy disk and try again.
Remember that the origin of a design may be an important issue. You have no real knowledge of the integrity of a design downloaded free from the Internet, and even designs that you purchase from a novice digitizer can have problems
Content Feedback
To help us improve our support, please provide your feedback below.