Innov-is I

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 11/05/2006
  • ID: faqh00000021_000

My outline is sewing off the pattern

This happens when the fabric is not set in the embroidery frame correctly or the upper thread is too tight.

 


  1. incorrect backing material (stabilizer) is put on the fabric. A thick stabilizer has to be used for elastic or thin fabric.

  2. Check the fabric is set tight in the frame 

  3. Decrease the upper thread tension manually to the basic thread tension setting or less.

     

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is 1200, Innov-is 1250, Innov-is 1500D/1500, Innov-is 2200, Innov-is 4000D/4000, Innov-is 5000, Innov-is 500D, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 97E, Innov-is I, Innov-is Ie, Innov-is V3, Innov-is V3 LE, Innov-is V5, Innov-is V5 LE, Innov-is V7, PE-180D, PE-190D, PE-300S, PE-400D, SuperGalaxie 3000/3000C/3000D/3100D

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit