MFC-J4535DWXL

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 15/05/2024
  • ID: faq00100745_002

Change the paper size and paper type

Set the Paper Size and Paper Type settings for the paper tray.

  • To get the best print quality, set the machine for the type of paper you are using.
  • When you change the size of the paper you load in the tray, you must change the Paper Size setting on the LCD at the same time.

 

  1. Press Setting [Settings] > [All Settings] > [General Setup] > [Tray Setting].
     
  2. Press Up or Down to display the tray options, and then press the option you want.
     
  3. Press [Paper Type].
     
  4. Press Up or Down to display the paper type options, and then press the option you want.

    Use plain paper only in Tray #2.

  5. Press [Paper Size].
     
  6. Press Up or Down to display the paper size options, and then press the option you want.
     
  7. Press Home.

    The machine ejects paper with the printed surface face up onto the paper tray at the front of the machine. When you use glossy paper, remove each sheet at once to prevent smudging or paper jams.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J4535DWXL, MFC-J4540DW(XL)

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit