ADS-2800W
![]() |
FAQs & Troubleshooting |
Wireless LAN Error Codes
If the machine's display displays an error code, locate the code in the table and use the recommended solution to correct the error.
Error Code | Recommended Solutions |
TS-01 |
The wireless setting is not activated. Turn the wireless setting on:
|
TS-02 |
The wireless access point/router cannot be detected.
|
TS-03 |
The wireless network and security settings you entered may be incorrect. Confirm the wireless network settings. Confirm that the entered or selected SSID/authentication method/encryption method/UserID/Userpass are correct. |
TS-04 |
The Authentication/Encryption methods used by the selected wireless access point/router are not supported by your machine. For the infrastructure mode, change the authentication and encryption methods of the wireless access point/router. Your machine supports the following authentication methods:
If the issue is not solved, the Network Name (SSID) or network settings entered may be incorrect. Confirm the wireless network settings. For Ad-hoc mode, change the authentication and encryption methods of your computer for the wireless setting. Your machine supports the Open authentication method only, with optional WEP encryption. |
TS-05 |
The security information (SSID/Network Key (Password)) is incorrect.
If your router uses WEP encryption, enter the Network Key (Password) used as the first WEP key. Your Brother machine supports the use of the first WEP key only. |
TS-06 |
The wireless security information (Authentication method/ Encryption method/ Network Key) is incorrect. Confirm the wireless security information (Authentication method/ Encryption method/ Network Key) using the Authentication Method table in error TS-04. If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. |
TS-07 |
The machine cannot detect a wireless access point/router that has WPS enabled. To configure your wireless settings using WPS, you must operate both your machine and the wireless access point/router. if you do not know how to operate your wireless access point/router using WPS, see the documentation provided with your wireless access point/router, ask the manufacturer of your wireless access point/router, or ask your network administrator. |
TS-08 |
Two or more wireless access points that have WPS enabled are detected. Confirm that only one wireless access point/router within range has the WPS method active and try again. |
TS-20 | The machine is still trying to connect to your wireless network. Wait a few minutes, and then check the WLAN status. |