HL-L3220CW(E)
![]() |
FAQs & Troubleshooting |
Set up your Brother machine on a wireless network (Windows / macOS)
1. Before you set up your Brother machine
You must find out the wireless network settings of your wireless router or access point. Check and write down the current wireless network settings below (you will need this information later):
- Network Name (also known as "SSID" or "ESSID")
- Network Key (also known as "Password", "Security Key", or "Encryption Key")
How to find the Network Name (SSID) and Network Key (Password)
- Check the base or side of your wireless router or access point.
- See the documentation provided with your wireless router or access point.
- If you need assistance during setup and want to contact Brother customer service, make sure you have your SSID (Network Name) and Network Key ready. We need this Information to assist you, so please get them ready.
- If you do not know this information (SSID and Network Key), you cannot continue with the wireless setup.
- If you cannot find your wireless Network Name and Network Key, contact your Internet service provider or router manufacturer.
If you cannot find the Network Name (SSID) and Network Key (Password) of your wireless router or access point, see the following FAQs:
For Windows users
> Click here to see how to find the wireless security information for Windows.
For Macintosh users
> Click here to see how to find the wireless security information for Macintosh.
After checking the network information of your wireless router or access point, go to step 2 to set up your machine on a wireless network.
If your wireless router or access point uses WEP encryption with multiple WEP keys, write down and use only the first WEP key.
2. Set up a Brother machine on a wireless network
To set up your Brother machine on a wireless network:
-
Connect the power cord to your Brother machine and then connect it to an AC power outlet (electrical socket).
Turn your Brother machine on.
-
Press Menu. (This step might be skipped in some models.)
-
Press the Up or Down arrow key to select the following:
- Select Network. Press OK.
- Select WLAN (Wi-Fi). Press OK.
- Select Find Network. Press OK.
-
When WLAN Enable? appears, enable the wireless network.
This will start the wireless setup wizard.
-
The machine will search for your network and display a list of available Network Names (SSIDs).
If a list of SSIDs displayed, press the Up or Down arrow key to select the SSID you wrote down earlier. -
Press OK.
-
Do one of the following:
-
If you are using an authentication and encryption method that requires the Network Key (Password)
Enter the Network Key, then press OK.
To apply your settings, select Yes. (This step might be skipped in some models.)Make sure you enter the wireless password.
Use your machine's control panel buttons or LCD to enter your password's lower-case and upper-case letters, numbers, or symbols.
For details on how to enter text on your Brother machine, see the Online User's Guide, available in the Manuals section of this web site.
> You can find the latest Online User's Guide in the Manuals section. -
If your authentication method is Open System and your encryption mode is None
Go to the next step.
-
If you are using an authentication and encryption method that requires the Network Key (Password)
-
The machine attempts to connect to the wireless device you have selected.
-
If your Brother machine connected successfully
The machine's LCD displays Connected.
-
If the connection failed
The machine will print a wireless connection report. Check the error code on the printed report.
> Click here for more information about error codes and solutions.
-
If your Brother machine connected successfully
3. Download and install your Brother machine's software
After setting up your Brother machine, you must install the driver. To download the driver:
Follow the installation instructions on the download page.