1. Before you set up your Brother machine

You must find out the wireless network settings of your wireless router or access point. Check and write down the current wireless network settings below (you will need this information later):
 

• Network Name (also known as "SSID" or "ESSID")
• Network Key (also known as "Password", "Security Key", or "Encryption Key")

How to find the Network Name (SSID) and Network Key (Password)

1. Check the base or side of your wireless router or access point.
2. See the documentation provided with your wireless router or access point.

After checking the network information of your wireless router or access point, go to step 2 to set up your machine on a wireless network.

2. Set up a Brother machine on a wireless network

To set up your Brother machine on a wireless network:

1. Connect the power cord to your Brother machine and then connect it to an AC power outlet (electrical socket).
   Turn your Brother machine on.
    
2. Press  (Settings) > Network > WLAN > Setup Wizard.
    
3. When Enable WLAN? Do you want to continue? or Enable WLAN? The Wired Network I/F will be disabled. Do you want to continue? appears, select Yes to accept.
   This will start the wireless setup wizard.
    
4. The machine will search for your network and display a list of available Network Names (SSIDs).
   When a list of SSIDs appears, press the Up or Down arrow keys to select the SSID you wrote down earlier, and then press it.
    
5. Press OK.
    
6. Do one of the following:
   • If using an authentication and encryption method that requires the Network Key (Password)
     Enter the Network Key, then press OK to apply your settings.
      
   • If your authentication method is Open System and your encryption mode is None
     Go to the next step.
7. The machine tries to connect to the wireless network you have selected.
   • If your Brother machine connected successfully
     The machine's LCD displays Connected.
      
   • If the connection failed
     The machine's LCD displays an error message. Check the error message and resolve the issue.
     > Click here for more information about the recommended solution to correct the error message.

3. Download and install your Brother machine's software

After setting up your Brother machine, you must install the driver. To download the driver:

For Windows users

> Go to the Downloads section of this website and download the Full Driver & Software Package.

Follow the installation instructions on the download page.

For Macintosh users

> Go to the Downloads section of this website and download the Full Software Package.

The installation instructions are available on the download page.

If you have completed the setup procedure but still cannot scan over the network, refer to the below link.

> Click here to see how to resolve the issue of being unable to scan using my Brother machine on a network.