HL-L6250DN
![]() |
FAQs & Troubleshooting |
Reset the Drum Counter
When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:
DO NOT reset the drum counter unless you are replacing the drum unit.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Make sure the machine is turned on.
-
Open the front cover.
- Press and hold OK for about two seconds to display Drum Unit, and then press OK.
- Press the Up arrow key to reset the drum counter.
- Close the front cover of the machine.
Content Feedback
To help us improve our support, please provide your feedback below.