This error message occurs when the Brother iPrint&Scan application is unable to detect your Brother machine. Refer to the following steps to resolve this issue.

1. Confirm the settings of your mobile device.
2. Confirm your Brother machine is connected to the network.
3. Confirm the settings and connection of the wireless access point/router.
4. Steps 1 through 3 have been confirmed but have not resolved the issue.

Step 1: Confirm the settings of your mobile device.

• Is Wi-Fi connection setting ON?
  
  The Brother iPrint&Scan application cannot be used on a cellular data network (5G / 4G / 3G / E / LTE) connection. Your mobile device must be connected to your wireless network. Therefore turn the Wi-Fi ON.
   
• (iOS version 14 or later)
  Make sure Brother iPrint&Scan has permission to access the local network.
  Settings > iPrint&Scan > Local Network

Step 2: Confirm your Brother machine is connected to the network.

• Turn off your Brother machine. Wait a few seconds, then turn it on again.
  
  Wait at least three minutes for the machine to join the network. Then start the Brother iPrint&Scan application.
   
• Is your Brother machine configured for a network?
  
  If your machine is directly connected to a computer with a USB cable, you need to join your machine to a wired or wireless network. For details about how to connect your Brother machine to a network, refer to the Quick Setup Guide or Online User's Guide.
  > The latest Quick Setup Guide or Online User's Guide is available in the Manuals section of this website.
   
• Is your Brother machine connected to the same network the mobile device is connected to?
  
  If your Brother machine is connected to a Wi-Fi network (SSID), confirm that the mobile device and your Brother machine are connected to the same Wi-Fi network (SSID).
  Refer to the following steps to confirm the connection to the same Wi-Fi network (SSID).
   

  Confirm the Brother machine network

  Check the "SSID" (SSID: Service Set ID).
  > Click here to see how to check the Network Name (SSID) that your machine is connected to.
   

  Confirm the mobile device network

   

  1. Tap the settings icon and confirm the Wi-Fi setting is ON.
  2. Tap Wi-Fi and confirm that the SSID is the same name as your Brother machine is connected to. If not, choose the SSID the Brother machine is connected to.

Step 3: Confirm the settings and connection of the wireless access point/router. (Infrastructure connection only)

• Are there multiple wireless access points/routers between your mobile device and Brother machine?
  
  If your mobile device and Brother machine are connected to different wireless access points/routers, the mobile device may not be able to find the Brother machine depending on the configuration of the wireless access point/router.
  
  <Wrong connection example>
  
  • (A) Internet
  • (B) Router
  • (C) Wireless access point/router (router function set ON)
  If the wireless access point/router is connected to another router, refer to the following example to modify the connection.
  
  
  <Correct connection example 1>
  Reconnect (wired or wireless) your Brother machine to the same access point/router as the mobile device is connected to.
  
  • (A) Internet
  • (B) Router
  • (C) Wireless access point/router (router function set ON)

   

  <Correct connection example 2>
  Turn OFF the access point/router's router function (e.g. DHCP), in which you are connected to.
  For details on turning off the router function, refer to the access point/router's User's Guide.
  
  • (A) Internet
  • (B) Router
  • (C) Wireless access point/router (router function set OFF)
• Are the security functions of the wireless access point/router blocking the connection?
  
  If any function to prevent communication between devices that are connected, such as MAC address filtering and "Privacy Separator" / "Network Isolation", is enabled, the mobile device may be unable to find the Brother machine. If these functions are running, temporarily turn OFF the settings.
  
  If you don't know the configuration of the security functions, refer to the manufacturer of your wireless access point/router or ask your network administrator.

  For more details about "Privacy Separator" / "Network Isolation" / MAC address filtering, click here and refer to Function settings of your WLAN access point.

Step 4: Steps 1 through 3 have been confirmed but have not resolved the issue.

If you have a computer, connect it to the network and verify the Brother machine is able to scan.

For information about how to connect your computer to a network, refer to the Quick Setup Guide or Online User's Guide.
> The latest Quick Setup Guide or Online User's Guide is available in the Manuals section of this website.

If your computer is connected to the same network as your Brother machine and mobile device, check the connection by scanning from your computer to your Brother machine. If you cannot scan from your computer, click here to see information to resolve the issue of being unable to scan via network.

If you can scan from your computer, uninstall and reinstall the Brother iPrint&Scan app from Google Play or the Apple Store.