HL-L9310CDW(T)
![]() |
FAQs & Troubleshooting |
Unpack your Brother machine
Follow the steps below to unpack the machine:
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
-
Open the box.
-
Remove the power cord.
-
Remove the Quick Setup Guide, which contains initial installation instructions for your Brother machine.
Remove the package containing printed materials.
-
Remove the packing foam.
-
Pull the machine out of the box.
To prevent possible injuries, at least two people should lift the machine.
-
Remove the plastic bag.
Peel off all blue tape.
-
Open the front cover.
-
Pull out the drum unit and toner cartridge assembly.
-
Remove all the orange packing material from the drum unit and toner cartridge assembly.
-
Peel off all blue tape.
-
Make sure you remove all the orange packing material from the drum unit and toner cartridge assembly.
-
Push the drum unit and toner cartridge assembly back into the machine.
-
Close the front cover.
-
Peel the blue tape from the paper support flap.
-
Pull the paper tray out of the machine.
-
Remove the blue tape, the silica gel pack, and all paper from the paper tray.
-
Push the paper tray completely into the machine.
Content Feedback
To help us improve our support, please provide your feedback below.