HL-J6000DW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 03/10/2016
  • ID: faq00003168_012

Unpack your Brother machine

Follow the steps below to unpack the machine:

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

 

  1. Open the box.
    Open the box
  2. Remove the Quick Setup Guide, which contains initial installation instructions for your Brother machine.
    Remove the Quick Setup Guide
  3. Remove the package containing printed materials and ink cartridges.
    Remove the package containing printed materials and ink cartridges
  4. Move the power cord so it does not interfere with lifting the machine.
    Move the power cord so it does not interfere with lifting the machine
  5. Remove the packing foam.
    Remove the packing foam
  6. Pull the machine out of the box.
    Pull the machine out of the box

    To prevent possible injuries, at least two people should lift the machine.

  7. Remove the plastic bag and the tape.
    Remove the plastic bag and the tape
  8. Open the document cover.
    Open the document cover
  9. Remove the plastic sheet.
    Remove the plastic sheet
  10. Close the document cover.
    Close the document cover

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-J6000DW, HL-J6100DW, MFC-J5330DW, MFC-J5335DW, MFC-J5730DW, MFC-J5930DW, MFC-J5945DW, MFC-J6530DW, MFC-J6930DW, MFC-J6935DW, MFC-J6945DW, MFC-J6947DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit