DCP-J4120DW

FAQs & Troubleshooting

Load photo paper

If you want to load standard paper, click here to see how to load standard paper.
If you want to load envelopes, click here to see how to load envelopes.

Follow the steps below to load photo paper in your Brother machine's paper tray:

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

Pull the paper tray completely out of the machine.
Open the output paper tray cover (1).
Do one of the following:
- If you load Photo L (89 x 127 mm)/(3.5 x 5 in.) in the paper tray, lift up the Photo L stopper (1).
- If you load Photo (10 x 15 cm)/(4 x 6 in.), in the paper tray, lift up the Photo stopper (2).
  Gently press and slide the paper guides (3) to fit the paper size.
Close the output paper tray cover.
Load up to 20 sheets of Photo or Photo L paper in the paper tray print side down.
More than 20 sheets of photo paper may cause paper jams.
Open the output paper tray cover (1).
Gently adjust the paper guides (1) to fit the paper.
Make sure the paper guides touch the edges of the paper and the paper is flat in the tray.
Close the output paper tray cover.
Slowly push the paper tray completely into the machine.
While holding the paper tray in the machine, pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).