ADS-1200
![]() |
FAQs & Troubleshooting |
Replace the Pick Up Roller
Your machine is equipped with a scan counter that automatically counts how many times the machine has scanned. After approximately 100,000 scans, you may have to replace the Pick Up Roller.
- Open the Top Cover (1) and the Front Cover (2).
- Pinch the Pick Up Roller Cover (1) and then pull the cover up and remove.
- Slide the Pick Up Roller(1) to the right edge.
- Pinch and pull the Pick Up Roller out of the machine.
- Place a new Pick Up Roller into the machine.Confirm the left and right sides of the Pick Up Roller before attaching it.
- Slide the Pick Up Roller(1) to the left edge while turning the Pick Up Roller.
- Close the Pick Up Roller Cover.
- Close the Front Cover.
- Reset the Pick Up Roller Counter. See Related Information:Reset the Usage Counters.
![](/g/b/img/faqend/faq00002892_501/gb/en/2530408/topic1_icon5.png)
Confirm the following:
- The Pick Up Roller Count value is 0.
Content Feedback
To help us improve our support, please provide your feedback below.