PDS-6000F
![]() |
FAQs & Troubleshooting |
Replace Roller
Your Brother machine is equipped with a scan counter, which automatically counts how many pages the machine scans.
When the machine scans 200,000 sheets, the machine will display a message "Please replace the roller and reset the roller count." on your computer to remind you to replace the Rollers.
-
Open the Top Cover (1) and the Front Cover (2).
-
Press and hold the buttons (1) on the inside of the ADF Cover and then pull the Reverse Roller Cover (2) down.
-
Pinch the Pick-up Roller Cover (1) and then pull the cover up.
-
Remove the old Reverse Roller from the shaft and insert the new Reverse Roller all the way onto the shaft.
- Pinch the new Reverse Roller and reinstall it into the machine.
- Securely close the Reverse Roller Cover until the hooks snap into the ADF Cover.
-
Slide the document guides as far apart as possible and pull the Roller Cover (1) down.
-
Pinch the Pick-up Roller and pull it out of the machine.
-
Pull the blue hook on the Separation Roller down.
-
Pinch the Separation Roller and pull it out of the machine.
- Pinch a new Separation Roller and install it into the machine.
-
Lift the blue hook that you pulled down in step 9.
- Pinch a new Pick-up Roller and install it into the machine.
-
Close the Roller Cover (1).
- Close the ADF Cover and the Top Cover.
-
Reset the counter. Follow the steps below to reset the counter.
(Windows)
- Launch DS Capture.
-
Click
(Setup), and then click the Information tab.
- Scroll down in the information window until you see Reset Roller button.
- Click Reset Roller Count to reset the usage counter.
- Launch DS Capture.
- Click the Information tab.
- Click Reset to reset the usage counter.
Content Feedback
To help us improve our support, please provide your feedback below.