DCP-J925DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Print an image from a memory card or USB Flash memory drive onto a printable disc.

Your Brother machine can print directly onto printable disc media, including CD-R/RW, DVD-R/RW, or Blu-ray Disc™.

 

There are four ways to print onto a printable disc:

 

Printing from media

 

You can select an image stored in a memory card or USB Flash memory drive and print that image on a printable disc by following these steps:

 

 

You can print eight images from a movie file onto a printable disc. The images are extracted from the movie file and laid out automatically.

 

 
  1. Insert a memory card or USB flash memory drive into the appropriate slot on your Brother machine.
    image
    1 USB Flash memory drive
    image
    2 Memory card slot

    image
  2. Press the Stop/Exit key.

     
  3. Press the LEFT OR RIGHT ARROW key to display Disc. (This step might be skipped in some models.)

     
  4. Press Disc on the screen.

     
  5. Press Print from card.
     

    You can also begin the print procedure by opening the Disc Guide.

     
  6. Make sure there is more than 4 in. (10 cm) of free space behind machine.
    image

  7. Press OK.

     
  8. Open the scanner cover and remove the Disc Tray.
    image

  9. Press OK.

    - The LCD asks you to set the internal and external diameter in the next screen.

     
  10. Press OK.

     
  11. Press the UP OR DOWN ARROW key to set the outside and inside diameter or the disc's printable area.
     

    Refer to the printable disc's package for the outside and inside diameter measurements.

     
  12. Press OK.

    - Images on the memory card or USB Flash memory drive will appear on the LCD.

     
  13. Press the LEFT OR RIGHT ARROW key to display the image you want to print on the disc.

     
  14. Press the image you want to print.

    - A print preview will be displayed on the LCD.

     
  15. Make sure the image you want to print is within the frame on the LCD.

    - Only the area within the frame will be printed.

    - Press + or - to change the image size.

    - Press the UP, DOWN, LEFT, and RIGHT ARROW key on the LCD to move the image.
     

    If the image you want to print is not within the frame on the LCD, the printed image will run off the disc.

     

  16. Do one of the following:

    - If you want to do a test print on paper, go to STEP 17.

    - If you want to print the disc, follow these steps:
     
    1. Press OK.

       
    2. Go to STEP 21.


  17. Press TestPrint.

    - If the Disc Guide opens, close it before performing the test print.
     
    image
  18. If a disc is in the Disc Tray, remove the disc.

     
  19. Make sure Letter or A4 size paper is set in the paper tray.
     

    You can only use Letter or A4 size paper for a test print.

     
  20. Press the Color (Colour) Start.

    - The machine will print the test image.

  21. Do one of the following:

    - If the test print is acceptable, follow these steps:
     
    1. Press OK.

       
    2. Go to STEP 22.

      - If the test print is not acceptable, go back to STEP 17.


  22. Enter the number of copies you want to make.

    - You can press the number box directly, then press the numbers on the screen or press + or -.

     
  23. Do one of the following:

    - If you do not want to change the print settings, go to STEP 26.

    - If you want to change the print settings, press Print Setting.

     
  24. Choose your printable disc type.

    - If you chose Printable Disc, go to STEP 25.

    - If you chose Glossy Disc, go to STEP 26.

  25. Press Normal or Slow Drying.

    - Use Slow Drying if the print is smudged.

  26. Press Print Disc.

     
  27. Push and pull down the Disc Guide to open it.
    image

  28. Place a disc on the Disc Tray.

    - Make sure to place the disc printed surface face up on the Disc Tray.

    - Make sure there is no dirt on the Disc Tray.
    image

  29. Insert the Disc Tray into the Disc Guide.

    - Make sure to line up the triangular mark on the Disc Tray with the one on the Disc Guide.
    image

    Do not push the Disc Tray all the way into the Disc Guide. If you push the Disc Tray past the point where the triangular marks are aligned, it will get stuck inside the machine.

     
  30. Press OK.

     
  31. Press Color (Colour) Start.

    - If you are only printing one disc, the "finished" message will appear on the LCD.

     
  32. Press OK.

    - If you are only printing one disc, go to STEP 33.

    - If you are printing more than one disc, follow these steps:

    1. Remove the Disc Tray from the Disc Guide.

       
    2. Remove the printed disc from the Disc Tray.

       
    3. Put a new disc on the Disc Tray.

       
    4. Press OK.

       
    5. Press Color (Colour) Start.

      The machine starts printing the next disc.

      Repeat STEP a thorough e for each additional disc you want to print.

      When you are finished printing, go to STEP 33.
       

    If the printed image runs off the edge of the disc, you may need to adjust the disc print position.

     
  33. Remove the Disc Tray from the Disc Guide.

     
  34. Remove the disc from the Disc Tray.

     
  35. Close the Disc Guide.
    image

  36. Replace the Disc Tray in the scanner cover.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-J925DW, MFC-J825DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.