MFC-J5620DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Out of Fax Memory

This message means the fax memory is full. Do one of the following to clear the message:


Delete all faxes in the list (For some models with Fax Preview)


  1. Press Fax(Fax).

  2. Press Received Faxes(Received Faxes).

  3. Press Print/Delete.

  4. Do one of the following:

    • To delete all new faxes, press Delete All (New Faxes).

    • To delete all old faxes, press Delete All (Old Faxes).


  5. Press Yes to confirm.

  6. Press Home(Home).


Turn off Memory Receive


  1. Press Settings(Settings).

  2. Press All Settings.

  3. Press the Up or Down arrow key to display Fax.

  4. Press Fax.

  5. Press the Up or Down arrow key to display Setup Receive.

  6. Press Setup Receive.

  7. Press the Up or Down arrow key to display Memory Receive.

  8. Press Memory Receive.

  9. Press Off.

  10. If received faxes remain in your machine's memory when you change the Memory Receive Operations, the Touchscreen will ask you one of the following questions:

      Print All Fax?

      Erase All Fax (Doc)?

    If you press Yes , faxes in the memory will be erased or printed before the setting changes. If a backup copy has already been printed it will not be printed again.


If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J1300DW, MFC-J4420DW, MFC-J4510DW, MFC-J4620DW, MFC-J4625DW, MFC-J4710DW, MFC-J5320DW, MFC-J5330DW, MFC-J5335DW, MFC-J5620DW, MFC-J5625DW, MFC-J5720DW, MFC-J5730DW, MFC-J5920DW, MFC-J5930DW, MFC-J650DW, MFC-J6520DW, MFC-J6530DW, MFC-J6720DW, MFC-J680DW, MFC-J6920DW, MFC-J6925DW, MFC-J6930DW, MFC-J6935DW, MFC-J870DW, MFC-J880DW, MFC-J890DW, MFC-J895DW, MFC-J985DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.