DCP-7045N

FAQs & Troubleshooting

FAQs & Troubleshooting

I recently installed the bundled or a new toner cartridge and I don't think I got the full yield from the toner.

 

If you feel you aren't getting the correct amount of toner out of your cartridge consider the following:

 

  1. Are you using a genuine Brother toner cartridge?


    If you are using a refill or non-Brother genuine toner cartridge, install a genuine Brother toner cartridge.  Since Brother is not the manufacturer of the toner cartridge you are using, we cannot guarantee or troubleshoot the performance of the toner.  Using non-Brother toners or drum units may cause hardware performance, print quality, and machine reliability issues. Genuine Brother drum units and toners are designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations. Brother strongly recommends that our customers use only genuine Brother drums and toners for best results.



  2. What types of documents do you typically print on your machine?  (For example: memos, documents, spreadsheets and reports, graphics etc.)


    • The life of the bundled toner cartridge may depend on the model and country you bought the machine in.
    • For the details of specific amount of toner cartridge yield, refer to the User's Guide for your machine. The latest User's Guide is available in the Manuals section.


    The actual amount of pages you get out of a toner cartridge is dependent upon what you print and the amount of toner coverage on a page.  You typically get maximum yield of a toner by printing at about 5% coverage which is a small memo or letter approximately 1,500 characters.  Print jobs with multiple pages, graphics, charts, and/or large amounts of solid black coverage will use much more toner and will shorten the life of the toner.  If you print at 10% coverage, you reduce the overall toner yield of a cartridge in half.  For example the yield from a 1,500 page standard toner cartridge would be reduced to 750 pages when printing at 10% coverage (a letter about 3,000 characters).




  3. Other suggestions


    1. Uninstall the drum and toner assembly and gently rock the assembly from side to side five or six times to re-distribute the toner evenly inside the cartridge.  If you have the Toner LED lit or the error message "Toner Life End" on the LCD, redistributing the toner may clear the LED or the error message when the drum and toner assembly is reinstalled into the machine.
    2. While the drum and toner assembly is out of the machine, clean the primary corona wire inside the drum unit by gently sliding the green tab on the top of the cartridge from left to right several times. Return the green tab to the home position before reinstalling the drum unit assembly.  This helps improve print quality.
      (To see the details of how to clean the primary corona wire, see the Related FAQ's.)





    If this FAQ doesn't answer your question or if you feel that you did not receive the full toner yield Brother advertised for your Brother cartridge, the consumables have a return to base warranty.  Please send the toner cartridge to the address below where we will test it and replace it if it is found to be faulty.

     

    Please ensure you include the model of your machine and its serial number along with your return address and contact details.  Failure to include this may result in a delay in processing your request.

     

    Brother UK Ltd, Service Centre, Shepley Street, Audenshaw, Manchester, M34 5JD.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-7030, DCP-7045N, HL-2140, HL-2150N, HL-2170W, MFC-7320, MFC-7440N, MFC-7840W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.