DCP-8110DN
 |
FAQs & Troubleshooting |
Fuser Error or Self-Diagnostic
-
The temperature of the fuser unit does not rise to a specified temperature within the specified time.
-
The fuser unit is too hot.
Please follow the steps below to solve the problem:
-
Turn the machine's power switch off, wait a few seconds, and then turn it on again.
-
Leave the machine for 15 minutes with the power on.
-
If the error still remains, please contact Brother Customer Service from "Contact Us" or call your dealer and report the error status, Fuser Error or Self-Diagnostic.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
DCP-1510, DCP-1512, DCP-1610W, DCP-1612W, DCP-8110DN, DCP-8250DN, DCP-9015CDW, DCP-9020CDW, HL-3140CW, HL-3150CDW, HL-3170CDW, HL-5440D, HL-5450DN, HL-5450DNT, HL-5470DW, HL-6180DW, HL-6180DWT, MFC-1810, MFC-1910W, MFC-8510DN, MFC-8520DN, MFC-8950DW, MFC-8950DWT, MFC-9140CDN, MFC-9330CDW, MFC-9340CDW
Content Feedback
To help us improve our support, please provide your feedback below.
