If your Brother machine is connected by USB cable, refer to "The printer status is Offline or Paused."

Please follow the steps below to solve the problem:

1. Click Start => All Programs => Brother => Your Brother machine name => Status Monitor
   
    
2. Check the printer status on the Status Monitor.
    
   • If the printer icon is greyed out and status is Offline, check the network connection. For details, refer to the FAQ "I cannot print from my computer via network."
      
     
   
   
   • If the printer icon is green and status is "Ready" or "Sleep", etc., go to Step 3.
      
     
     
      
3. For Windows Vista Users:
   Click Start => Control Panel => Hardware and Sound => Printers, right click on the printer icon for your Brother machine and choose Properties.
   (If there is the menu Run as administrator, choose it and click Properties. When the User Account Control prompt appears, click Continue.)
   
   
   For Windows 7 Users:
   Click Start => Devices and Printers, right click on the printer icon for your Brother machine and choose Printer properties.
   
   
    
4. Click on the Ports tab and click Configure Port ...
   For Windows 7 Users: If all buttons are greyed out, click General tab and click Change properties. Enter the password for an administrator and click Yes.
    
   
    

   If the Configure Port ... button is greyed out, go to STEP 1: Check the IP address and the Boot Method (IP Config) of your Brother machine.

    


5. Change the Protocol to Raw and click OK to close the driver properties.
    
   

If the problem still continues, please continue to follow the instructions below:

STEP1: Check the IP address and the Boot Method (IP Config) of your Brother machine

If your Brother machine was purchased Network Ready, then the IP address can be determined via the control panel of the Brother machine or by printing a Report Page which is called the User Settings list or Network Configuration (Network Config) list or report. For more information on how to print a Report Page, please refer to the User's Guide or Network User's Guide for your machine. The latest User's Guide or Network User's Guide are available in the Manuals section.

If the Boot Method (IP Config) is AUTO, change it to STATIC. You can change the setting from the Control Panel of the Brother machine by choosing LAN or Network and TCP/IP menu. For details, please refer to the User's Guide or Network User's Guide.

STEP 2 : Add a port in the printer driver

1. Open the printer driver properties and click on the Ports tab following the first listed instructions from Step1 to 5. Click on Add Port...
    

   

    
2. Choose Standard TCP/IP Port and click on New Port...
    

   

    
3. The Add Standard TCP/IP Printer Port Wizard will start. Click on Next.
    

   

    
4. Enter your Brother machine's IP address that is checked by Step1 and click on Next.
   If "A port with that name already exists. Choose another port name." message appears, change the Port Name.
   For example: Brother_[your machine's IP address].
    

   

    
5. Click on Finish.
    

   

    
6. Confirm that the new port is listed and checked. 
    
7. Click Configure Port...
    

   

    
8. Change the Protocol to Raw and click OK to close the driver properties.
    

   

If the problem still continues, refer to the FAQ "The printer status is Offline or Paused."