MFC-J6710DW

FAQs & Troubleshooting

FAQs & Troubleshooting

When I turn the Power ON, I always have to re-enter the Date and Time.

The date and time is stored on the main board.  If you disconnect the machine from the power supply for a long period, the machine will lose the information.  We recommend that you keep the machine connected to the power supply at all times.  If you have to disconnect the machine from the power supply, for example, over night or over the weekend, the machine will probably display the wrong date and time.

 

After the initial setup we recommend that you leave the equipment turned on and connected to the power supply for a couple of days. Only then can the battery inside the machine be fully charged and give full performance.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-145C, DCP-163C, DCP-165C, DCP-167C, DCP-385C, DCP-585CW, DCP-6690CW, DCP-9040CN, DCP-9042CDN, DCP-9045CDN, DCP-J1050DW, DCP-J1100DW, DCP-J1140DW, DCP-J132W, DCP-J140W, DCP-J152W, DCP-J4110DW, DCP-J525W, DCP-J552DW, DCP-J562DW, DCP-J572DW, DCP-J725DW, DCP-J752DW, DCP-J772DW, DCP-J774DW, DCP-J785DW, DCP-J925DW, HL-J6000DW, HL-J6100DW, MFC-250C, MFC-290C, MFC-297C, MFC-490CW, MFC-5490CN, MFC-5890CN, MFC-5895CW, MFC-6490CW, MFC-6890CDW, MFC-790CW, MFC-9440CN, MFC-9450CDN, MFC-9840CDW, MFC-990CW, MFC-J1010DW, MFC-J1300DW, MFC-J430W, MFC-J4335DW(XL), MFC-J4340DW(E), MFC-J4410DW, MFC-J4510DW, MFC-J4535DWXL, MFC-J4540DW(XL), MFC-J4610DW, MFC-J470DW, MFC-J4710DW, MFC-J480DW, MFC-J491DW, MFC-J497DW, MFC-J5330DW, MFC-J5335DW, MFC-J5730DW, MFC-J5910DW, MFC-J5930DW, MFC-J5945DW, MFC-J625DW, MFC-J650DW, MFC-J6510DW, MFC-J6530DW, MFC-J6710DW, MFC-J680DW, MFC-J6910DW, MFC-J6930DW, MFC-J6935DW, MFC-J6945DW, MFC-J6947DW, MFC-J825DW, MFC-J870DW, MFC-J880DW, MFC-J890DW, MFC-J895DW, MFC-J985DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.