MFC-J625DW
 |
FAQs & Troubleshooting |
Ink is still wet after printing on Glossy Paper and even after ink dries, smudges appear.
To resolve this issue ensure that the Media Type setting in the printer driver or the Paper Type setting in the machine's menu matches the type of paper you are using.
Even if you use non-Brother Glossy Paper and select Other Photo Paper or Other Glossy for the settings, this issue may still occur. In that case select Brother BP71 Photo Paper or Brother BP71 for your settings.
To confirm or change the current settings follow the procedures shown below:
A. For PC printing:
- For Windows users
- Open Printing Preferences. (Click here to see the details of how to open Printing Preferences.)
- Select the Basic tab.
- Choose Brother BP71 Photo Paper for the Media Type.
- Click OK.
- For Mac OS X users
- Open the Print dialog. (Click here to see the details of how to open the Print dialog.)
- Choose Print Settings in the Print dialog box.
- Click on the drop down menu next to Media Type.
- Choose Brother BP71 Photo Paper.
B. For Photo printing from a memory card or USB Flash memory drive:
These settings are temporary, and the machine returns to its default settings 3 minutes after printing, unless you have set the Mode Timer to 2 minutes or less.
- Make sure you have put a memory card or USB Flash memory drive in the correct slot.
Press
(Photo).
- Do one of the following:
-Press View Photo(s) and press the UP OR DOWN ARROW key to display each photo. When the photo you want is displayed, press OK.
-If you want to print all photos, press Print All.
- Press Options.
- Press the UP OR DOWN ARROW key to display Paper Type.
- Press Paper Type.
- Press the UP OR DOWN ARROW key to display Brother BP71.
- Press Brother BP71.
- Press Start to print.
[NOTE] Proper paper handling after the page has been printed:
- After the photo has finished printing, remove the photo immediately from the machine and place on flat surface to dry for 24 hours. Do not allow additional printed documents to lay on top of the photo while in the machines paper output tray.
- Do not place anything on top of photo until after 24 hours. This can cause the picture not to dry properly.
- Do not place the photo in a photo album or a picture frame until after 24 hours. This can cause the picture not to dry properly.
