HL-J6000DW

FAQs & Troubleshooting

Cover is Open

The following covers may not be completely closed. Check if the following covers are completely closed.

The top cover or scanner cover is not locked in the closed position.

Lift the top cover or scanner cover and then close it again.
Make sure the telephone line cord and/or interface cable (if used) have been guided correctly through the cable channel and out the back of the machine.

The ink cartridge cover or ink tank cover is not locked in the closed position.

Firmly close the ink cartridge cover or ink tank cover until it locks into place.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

Go to the Manuals section

If you need further assistance, please contact Brother customer service:

Go to the Contact Us section

Related Models

DCP-J1050DW, DCP-J1140DW, DCP-J1800DW, HL-J6000DW, HL-J6100DW, MFC-J1010DW, MFC-J4335DW(XL), MFC-J4340DW(E), MFC-J4535DWXL, MFC-J4540DW(XL), MFC-J5340DW(E), MFC-J5345DW, MFC-J5740DW, MFC-J5955DW, MFC-J6540DW(E), MFC-J6940DW, MFC-J6955DW, MFC-J6957DW

Content Feedback

To help us improve our support, please provide your feedback below.