MFC-L8690CDW
 |
FAQs & Troubleshooting |
The colour of your printouts is not what you expected
Check the following points to resolve the issue:
-
To improve the colour density, calibrate the colours using first the Touchscreen / Control Panel and then the printer driver.
> Click here to see how to carry out calibration.
-
To adjust the print position of colours for sharper edges, perform the colour registration using the Touchscreen / Control Panel.
> Click here to see how to perform the colour registration.
-
Adjust the copy density and contrast if you are copying.
-
Make sure Toner Save mode is off on the Touchscreen / Control Panel or the printer driver.
-
If the print quality is poor, clear the Improve Grey Colour check box in the printer driver.
-
If the print quality of the black portion is not as you expected, select the Enhance Black Printing check box in the printer driver.
-
Identify the colour causing the issue and put in a new toner cartridge.
To identify the colour of the toner cartridge and replace toner cartridge, follow the steps below:
-
> Click here to print the chart. [345KB/ PDF]
-
Compare your printed document with the printed chart to identify the colour causing the issue.
-
Replace the toner cartridge of the problem colour.
> Click here to see how to replace the toner cartridge.
-
Install a new drum unit.
> Click here to see how to replace the drum unit.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
DCP-L3510CDW, DCP-L3550CDW, DCP-L8410CDW, MFC-L3710CW, MFC-L3730CDN, MFC-L3750CDW, MFC-L3770CDW, MFC-L8690CDW, MFC-L8900CDW, MFC-L9570CDW(T), MFC-L9577CDW
Content Feedback
To help us improve our support, please provide your feedback below.
