HL-1470N
 |
FAQs & Troubleshooting |
The Drum LED is still lit even after replacing the old drum unit with a new one. What can I do?
If the Drum LED is still lit after replacing the drum unit, the Drum counter may not be reset.
Reset the Drum counter as follows:
Do not reset the Drum counter when you have not replaced the Drum unit.
-
Open the front cover.
-
Locate the control panel button under the LED lights on the left side.
-
Press the control panel button until all lights are lit, then release it.
The Drum counter is now reset.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
HL-1030, HL-1230, HL-1240, HL-1250, HL-1270N, HL-1440, HL-1450, HL-1470N
Content Feedback
To help us improve our support, please provide your feedback below.
