HL-1670N
![]() |
FAQs & Troubleshooting |
What menu settings are available from the Printers Control Panel?
We named the Paper tray in this manual and LCD panel as shown below:
Upper paper tray | Tray 1 |
Multi-purpose tray | MP tray |
Optional lower tray | Tray 2 |
There are 8 modes. For more information about the selections available for each mode, refer to the pages listed below.
INFORMATION
Setting Menu | Description | |
PRINT SETTINGS | Print the Configuration page. | |
PRINT TEST | Print the test page. | |
RRINT DEMO | Print the demonstration. | |
PRINT FILE LIST | Print the file list. | |
PRINT FONTS | Print the font list and samples. | |
VERSION | Sub-Setting Menu | Description |
SER.NO=######### | Printer serial number. | |
ROM VER=#### | ROM firmware version (only Network users) | |
ROM DATE ##/##/## | ROM date (only Network users) | |
NET VER=#### | Network firmware version | |
NET DATE ##/##/## | Network date | |
RAM SIZE=###MB | The size of memory in this printer. | |
MAINTENANCE | PAGE COUNTER | =###### |
REMAIN DRUM | =###### | |
REMAIN PF KIT1 | =###### | |
REMAIN PF KIT2 | =###### | |
REMAIN FUSER | =###### | |
REMAIN LASER | =###### |
PAPER
Setting Menu | Description |
SOURCE | =AUTO / MP TRAY /TRAY1 / TRAY2 |
MP FIRST | =OFF/ON Feed paper from the MP tray first. |
MANUAL FEED | =OFF/ON |
DUPLEX | =OFF/ON(LONG BIND)/ON(SHORT BIND) |
QUALITY
Setting Menu | Description |
RESOLUTION | =300/600/HQ1200 You can choose a print resolution of 300, 600 or HQ1200. |
HRC | =OFF/LIGHT/MEDIUM/DARK HRC: High Resolution Control offers improved print quality of characters and graphics that conventional laser printers cannot attain with a resolution of 300 or 600 dpi. |
TONER SAVE | =OFF/ON |
DENSITY | =-6:0:6 Increase or decrease the print density. |
PRINT MENU
Setting Menu | Description | |
MEDIA TYPE | =PLAIN PAPER/TRANSPARENCIES/THIN PAPER/THICK PAPER/THICKER PAPER/BOND PAPER | |
PAPER | Set cut sheet paper size to LETTER, LEGAL, A4, A5, A6, B5, B6, EXECUTIVE, COM10, MONARCH, C5 and DL | |
COPIES | =1:999 Shows the number of printed pages. | |
ORIENTATION | =PORTRAIT/LANDSCAPE This printer can print pages in portrait or landscape orientation. | |
PRINT POSITION | This printer can be adjusted to correct the page format. | |
Sub-Setting Menu | Description | |
X OFFSET=0 | Move the print start position (at the upper left corner of pages) horizontally up to ?500 (left) to +500 (right) dots in 300 dpi units?. | |
Y OFFSET=0 | Move the print start position (at the upper left corner of pages) vertically up to ?500 (up) to +500 (down) dots in 300 dpi units. | |
AUTO FF=OFF | =OFF/1:5:99 (sec) Allows you to print the remaining data without pressing the Go switch. | |
FF SUPPRESS | =OFF/ON Turn on/off the form feed suppress function. | |
HP LASERJET |
FONT NO. | =I0000:????? |
FONT PITCH/POINT | =???.?? | |
SYMBOL/CHARACTER SET | PC-8/§c Set the symbol set or the character set. | |
TABLE PRINT | Print code table. | |
AUTO LF=OFF | =OFF/ON ON: CR§ÂCR+LF, OFF: CR§ÂCR | |
AUTO CR=OFF | =OFF/ON ON: LF§ÂLF+CR, FF+CR, or VT§ÂVT+CR OFF: LF§ÂLF, FF§ÂFF, or VT§ÂVT | |
AUTO WRAP=OFF | =OFF/ON Line feed and carriage return occur when the printer reaches the right margin. | |
AUTO SKIP=ON | =ON/OFF line feed and carriage return occur when the printer position reaches the bottom margin. | |
LEFT MARGIN | =#### Set the left margin at column 0 to 126 columns at 10 cpi. | |
RIGHT MARGIN | =#### Set the right margin at column 10 to 136 columns at 10 cpi. | |
TOP MARGIN | =#### Set the top margin at a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0§h Factory setting=0.5 | |
BOTTOM MARGIN | =#### Set the bottom margin at a distance from the bottom edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0§h Factory setting: 0.33(None-HP), 0.5(HP) | |
LINES | =#### Set the number of lines per page from 5 to 128 lines. | |
EPSON FX-850 | FONT NO. | =I0000:????? |
FONT PITCH/POINT | =???.?? | |
SYMBOL/CHARACTER SET | PC-8/§c Set the symbol set or the character set. | |
TABLE PRINT | Print code table. | |
AUTO LF=OFF | =OFF/ON ON: CR§ÂCR+LF OFF: CR§ÂCR | |
AUTO MASK | =OFF/ON | |
LEFT MARGIN | =#### Set the left margin at column 0 to 126 columns at 10 cpi. | |
RIGHT MARGIN | =#### Set the right margin at column 10 to 136 columns at 10 cpi. | |
TOP MARGIN | =#### Set the top margin a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0§h Factory setting=0.33 | |
BOTTOM MARGIN | =#### Set the bottom margin a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0§h Factory setting=0.33 | |
LINES | =#### Set the number of lines per page from 5 to 128 lines. | |
IBM PROPRINTER | FONT NO. | =I0000:????? |
FONT PITCH/POINT | =???.?? | |
SYMBOL/CHARACTER SET | PC-8/§c Set the symbol set and the character set. | |
TABLE PRINT | Print code table. | |
AUTO LF=OFF | =OFF/ON ON: CR§ÂCR+LF, OFF: CR§ÂCR | |
AUTO CR=OFF | =OFF/ON | |
LEFT MARGIN | =#### Set the left margin at column 0 to 126 columns at 10 cpi. | |
RIGHT MARGIN | =#### Set the right margin at column 10 to 136 columns at 10 cpi. | |
TOP MARGIN | =#### Set the top margin a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0§h Factory setting=0.33 | |
BOTTOM MARGIN | =#### Set the bottom margin a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0§h Factory setting=0.33 | |
LINES | =#### Set the number of lines per page from 5 to 128 lines. | |
BR-SCRIPT | ERROR PRINT | =OFF/ON |
APT | =OFF/ON APT: Advanced Photoscale Technology offers photographic fine grayscale on graphics. APT setting is available only at 600 dpi. |
NETWORK
Setting Menu | Description | |
TCP/IP | Sub-Setting Menu | Description |
TCP/IP ENABLE | =ON/OFF | |
IP ADDRESS= | ###.###.###.### | |
SUBNET MASK= | ###.###.###.### | |
GATEWAY= | ###.###.###.### | |
IP BOOT TRIES | =# | |
IP METHOD | =AUTO/STATIC/RARP/BOOTP/DHCP | |
NETWARE | NETWARE ENABLE | =ON/OFF |
NET FRAME | =AUTO/8023/ENET/8022/SNAP | |
APPLETALK | =ON/OFF | |
NETBEUI | =ON/OFF | |
DLC/LLC | =ON/OFF | |
BANYAN | =ON/OFF | |
LAT | =ON/OFF | |
NETBIOS/IP | =ON/OFF | |
ENET | =AUTO/100B-FD/100B-HD/10B-FD/10B-HD |
INTERFACE
Setting Menu | Description | |
AUTO IF TIME |
= 1:5:99 (sec) You must set the timeout period for the auto interface selection. | |
INPUT BUFFER |
= Level1:5:15 Increase or decrease the input buffer capacity. |
RESTART PRINTER? |
PARALLEL | When using the parallel interface | |
Sub-setting Menu | Description | |
HIGH SPEED |
=ON/OFF Turns the high speed parallel communications ON/OFF. | |
BI-DIR=ON/OFF |
=ON/OFF Turns the bi-directional parallel communications ON/OFF. |
RESET MENU
Setting Menu | Description |
RESET PRINTER | Resets the printer and restores all printer settings - including command settings - to settings you have previously made with the control panel switches. |
FACTORY RESET | Resets the printer and restores all printer settings - including command settings - to the factory settings. |
Content Feedback
To help us improve our support, please provide your feedback below.