MFC-J6920DW
![FAQs & Troubleshooting FAQs & Troubleshooting](/g/b/shared/img/module/icon_question_33.png) |
FAQs & Troubleshooting |
My documents are sent to a different machine (the IP address is not unique and "IP Config" changes from "Auto" to "Static")
Set the BOOT method to "Auto" and disable the APIPA protocol:
-
Press
(Settings).
-
Press All Settings.
-
Press the Up or Down arrow to display Network, and then press it. (This step might be skipped in some models.)
-
Press the Up or Down arrow to display WLAN, and then press it. (This step might be skipped in some models.)
-
Press the Up or Down arrow to display TCP/IP, and then press it. (This step might be skipped in some models.)
-
Press the Up or Down arrow to display BOOT Method, and then press it. (This step might be skipped in some models.)
-
Press the Up or Down arrow to display Auto, and then press it. (This step might be skipped in some models.)
-
Press Auto.
-
Press the Up or Down arrow to display APIPA. Press APIPA.
-
Press Off.
-
Press
(Home).
If you still cannot use your machine, restart your wireless network interface.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
DCP-9015CDW, DCP-9020CDW, DCP-J552DW, DCP-J562DW, DCP-J752DW, DCP-J785DW, MFC-9330CDW, MFC-9340CDW, MFC-J4510DW, MFC-J4710DW, MFC-J650DW, MFC-J6520DW, MFC-J6720DW, MFC-J680DW, MFC-J6920DW, MFC-J6925DW, MFC-J870DW, MFC-J880DW, MFC-J985DW
Content Feedback
To help us improve our support, please provide your feedback below.