MFC-790CW
 |
FAQs & Troubleshooting |
How do I record an outgoing message on my Brother machine's built-in TAD?
RECORDING THE TAD OUTGOING MESSAGE (OGM)
To record an outgoing message for your Brother machine's built-in digital message (TAD Message), follow these steps:
To record an outgoing message for your Brother machine's built-in digital message (TAD Message), follow these steps:
- Press MENU on the touch screen.
- Press the UP OR DOWN ARROW key to display Fax.
- Press FAX.
- Press the UP OR DOWN ARROW key to display Setup TAD.
- Press SETUP TAD.
- Press the UP OR DOWN ARROW key to display OGM.
- Press OGM.
- Press TAD MESSAGE.
"TAD Message" is the ONLY setting you can choose if you want to enable the TAD. - Press RECORD MSG.
- Record your outgoing message:
- If your Brother machine has Digital Cordless Handset (DECT™ Handset),
speak clearly toward the microphone
on the control panel to record your message. Press STOP/EXIT when finished recording your message. The TAD will play back your outgoing message.
- If not, pickup the handset and record your message. Replace the handset when finished recording your message. The TAD will play back your outgoing message.
For example: "Hello. We are unable to take your call at this time. Please leave a message after the signal. If you wish to send a fax, please press *51, wait until you hear fax tones, then press the Start button."
Your outgoing message should be less than 20 seconds long.
- If your Brother machine has Digital Cordless Handset (DECT™ Handset),
- Press the STOP/EXIT key.
Content Feedback
To help us improve our support, please provide your feedback below.
