MFC-J430W

FAQs & Troubleshooting

FAQs & Troubleshooting

Make a two-sided copy. (Duplex)

Copying on both sides of a single sheet of paper is called duplex copying.

Your Brother machine does not have a built-in duplex copying feature. However, you can manually make duplex copies by copying on one side of a sheet of paper, putting the printed page back into the machine's paper tray, then copying on the other side.

 

 

Using the ADF

To duplex copy using the ADF, follow these steps:

 

  1. Place the first page you want to copy into the ADF face down, top edge first until the LCD displays ADF Ready and you feel it touch the roller.
     
  2. Press COPY. (MFC models only)
     
  3. Do one of the following:

     

    • Press Black (Mono) Start to make a black and white copy.
       
    • Press Color (Colour) Start to make a colour copy.

     

    The machine will print the first side of your copy.
     
  4. Remove the printed page from the Brother machine.
     
  5. Do one of the following:

     

    • If you only printed text, go to STEP 6.
       
    • If you printed an image, follow these steps:

       

      1. Wait 5 minutes to allow the ink to dry on the printed page.
         
      2. Go to STEP 6.

     

  6. Empty the paper tray completely.

    Do not add the printed pages to the top of a stack of unprinted paper.
     
  7. Put the printed pages back into the paper tray, top page first with the printed sides face up, blank side down.

    Make sure the pages are completely flat before you put them back in the paper tray.

     

    • If you are printing in Portrait orientation, insert the paper so that the top edges of the images are at the back of the tray.
       
    • If you are printing in Landscape orientation, insert the paper so that the top edges of the images are at the right-hand side of the tray.

     

    Paper orientation
    For Portrait     For Landscape
    Portrait     Landscape

     

  8. Place the second page you want to copy into the ADF face down, top edge first until the LCD displays ADF Ready and you feel it touch the roller.
     
  9. Press COPY. (MFC models only)
     
  10. Do one of the following:

     

    • Press Black (Mono) Start to make a black and white copy.
       
    • Press Color (Colour) Start to make a colour copy.

     

    The machine will copy on to the reverse side of your page.

 

Using the flatbed scanner glass

To duplex copy using the flatbed scanner glass, follow these steps:

 

  1. Lift the document cover.
     
  2. Place the first page you want to copy face down on the flatbed scanner glass.

    Use the document guide lines in the upper-left corner of the flatbed scanner glass to help you position your document.
     
  3. Close the document cover.

    If you are scanning a book or thick document, do not slam or press on the document cover.
     
  4. Press COPY. (MFC models only)
     
  5. Do one of the following:

     

    • Press Black (Mono) Start to make a black and white copy.
       
    • Press Color (Colour) Start to make a colour copy.

     

    The machine will print the first side of your copy.
     
  6. Remove the printed page from the Brother machine.
     
  7. Do one of the following:

     

    • If you only printed text, go to STEP 8.
       
    • If you printed an image, follow these steps:

       

      1. Wait 5 minutes to allow the ink to dry on the printed page.
         
      2. Go to STEP 8.

     

  8. Empty the paper tray completely.

    Do not add the printed pages to the top of a stack of unprinted paper.
     
  9. Put the printed pages back into the paper tray, top page first with the printed sides face up, blank side down.

    Make sure the pages are completely flat before you put them back in the paper tray.

     

    • If you are printing in Portrait orientation, insert the paper so that the top edges of the images are at the back of the tray.
       
    • If you are printing in Landscape orientation, insert the paper so that the top edges of the images are at the right-hand side of the tray.

     

    Paper orientation
    For Portrait     For Landscape
    Portrait     Landscape

     

  10. Lift the document cover.
     
  11. Place the second page you want to copy face down on the flatbed scanner glass.

    Use the document guide lines in the upper-left corner of the flatbed scanner glass to help you position your document.
     
  12. Close the document cover.
     
  13. Press COPY. (MFC models only)
     
  14. Do one of the following:

     

    • Press Black (Mono) Start to make a black and white copy.
       
    • Press Color (Colour) Start to make a colour copy.

     

    The machine will copy on to the reverse side of your page.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J430W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.