Where is the Manual 2-sided(Duplex) setting option in the Mac OS X 10.3 driver ?
Refer to the instructions below:
Select "Print" from the "File" menu and open the "Print" dialog.
Select the "Paper Handling" option in the "Presets" section.
Select "Even numbered pages" and click on the "Print" button.
After the even pages are printed, remove them from the Output Tray, flip over the paper and place back into the Paper Feed Tray, so that the printed pages face up, with the bottom edge first.
Again select the "Paper Handling" option in the "Presets" section as you did in Step 2.
Select "Odd numbered pages" and click on the "Print" button.
Check the "Reverse page order" box depending on the setting of the "Input Tray" or "Output Tray".
If your question was not answered, have you checked other FAQs?
