HL-3070CW

FAQs & Troubleshooting

FAQs & Troubleshooting

Reprint the last print job

You can reprint a document without sending the data again from your computer.

  • The reprint function is not available when Secure Function Lock 2.0 is on. (Secure Function Lock is only supported on models that can be used both with a wireless and wired network connection.)
  • If you want to cancel reprinting, press Cancel.
  • If the printer does not have enough memory to spool the print job data, it will not print the document.
  • If you wait 30 seconds without pressing a button, the LCD leaves the Reprint setting automatically.
  • After turning off the power switch off, the data for the last job will be deleted. Please reprint it before turning off the power switch.


Follow the instructions below to reprint the last document.

  1. Check the Reprint setting is on. If not, change it,

    From the control panel of the printer:

    1. Press + or - to choose "General Setup". Press OK.
    2. Press + or - to choose "Reprint". Press OK.
    3. Check the Reprint setting.
      If the Reprint setting is "On", press OK.
      If the Reprint setting is "Off", press + or - to choose "On". Press OK. The setting has been changed and you can use the Reprint function from the next time you print a document from your computer.


    From the printer driver (For Windows users only):

    If you are a Macintosh user or using the BR-Script printer driver for Windows, there is no option to change the setting using the printer driver.
    To change the setting, please refer to the instructions, "From the control panel of the printer" above.

    • If you print with the Printer Driver for Windows supplied with the printer, the setting for Use Reprint in the printer driver will take priority over the settings made on the control panel of the printer.
    • The screens are from Windows XP. The screens on your computer may vary depending on your operating system (OS).


    1. Open Printing Preferences. (Click here to see the details of how to open Printing Preferences.)

    2. Open the Advanced tab and click Other Print Options.
      Advanced Tab

    3. Choose the "Use Reprint" in the Printer Function list and make sure the "Use Reprint" check box is ticked. If not, tick the "Use Reprint" check box.
      Reprint On

    4. Click OK.
      The setting has been changed and you can use the Reprint function from the next time you printed a document from your computer.

  2. Reprint the document as follows:

    If the Reprint setting has just been changed, you cannot use the reprint function to print the last job. To use the reprint function, please print the document from your computer first and then follow the steps below to reprint it.


    1. Press Go for about 4 seconds and release it.
      Make sure that the LCD shows the "Reprint : Print" message.

    2. Press + or - to choose "Print". Press OK.

    3. Press + to enter the number of copies you want between 1 and 999 Copies.

    4. Press Go or OK.
      The document will be printed.


If you want to prevent other people from printing your data with the Reprint function, you can change the Reprint setting to off.

From the control panel of the printer:

  1. Press + or - to choose "General Setup". Press OK.
  2. Press + or - to choose "Reprint". Press OK.
  3. Press + or - to choose "Off". Press OK.
    The setting has been changed to off.

From the printer driver (Windows users only):

If you are a Macintosh user or using the BR-Script printer driver for Windows, there is no option to change the setting using the printer driver.
To change the setting, please refer to the instructions, "From the control panel of the printer" above.

  • If you print with the Printer Driver for Windows supplied with the printer, the setting for Use Reprint in the printer driver will take priority over the settings made on the control panel of the printer.
  • The screens are from Windows XP. The screens on your computer may vary depending on your operating system.


  1. Open Printing Preferences. (Click here to see the details of how to open Printing Preferences.)

  2. Open the Advanced tab and click Other Print Options.
    Advanced Tab

  3. Choose "Use Reprint" in the Printer Function list and untick the "Use Reprint" checkbox.
    Reprint Off

  4. Click OK.
    The setting has been changed to off.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-3040CN, HL-3070CW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.