Model discontinued. This page is no longer updated.

FAX-T98

FAQs & Troubleshooting

FAQs & Troubleshooting

I have my FAX machine set in the FAX/TEL (F/T) answer mode. What happens if I do not answer the telephone and it's not a fax call?

  • When your telephone/fax number is dialed, the FAX and all telephones on the same line will ring the number of times you have selected for the Ring Delay. If you do not answer the call, the FAX machine answers upon completion of the Ring Delay. It will then determine if it is a fax or a telephone (voice) call by listening for fax tones (a series of beeps every 3 seconds).
  • If your FAX machine hears these tones, it will receive the fax. If the FAX does not hear any fax tones, it will assume it is a telephone (voice) call and will alert you to the call through pseudo-ring.  The length of time that the "special" ring tones occurs is called the F/T Ring Time. These tones will ring on the FAX machine only (extension or an external telephone will not ring). However, you can answer the call from the handset of the FAX or an extension telephone connected on the same line.
  • If you are at the FAX, you can lift the handset of the FAX to answer.
  • If you answer using an extension telephone (telephone connected to a separate wall socket), you must press the telephone answer code, #51 to release the call from the FAX.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

FAX-T104, FAX-T106, FAX-T94, FAX-T96, FAX-T98

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.