Model discontinued. This page is no longer updated.

MFC-8460N

FAQs & Troubleshooting

FAQs & Troubleshooting

After I installed Sun JavaVM, some applications will not work correctly.

Sometimes, after you install Sun JavaVM when MS JavaVM is also installed, some applications will not work correctly.


You can disable Sun JavaVM to use the MS JavaVM based application that works with your web browser.

How to set Sun JavaVM off

  1. Click 'Start' and then 'Setting' and select 'Control Panel'
    (Depending on the Operating System you are using, the menu name and direction maybe slightly different.)
  2. Select 'Internet Properties'. Check off 'Java (Sun) in the 'Advanced' tab.

When you install Sun JavaVM, the Sun JavaVM settings are automatically switched on

 

  1. Click 'OK' and restart your computer.

 

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-110C, DCP-115C, DCP-117C, DCP-120C, DCP-130C, DCP-135C, DCP-310CN, DCP-315CN, DCP-330C, DCP-340CW, DCP-540CN, DCP-7010, DCP-7010L, DCP-7025, DCP-750CW, DCP-8060, DCP-8065DN, DCP-9010CN, DCP-J525W, DCP-J725DW, DCP-J925DW, FAX-1840C, FAX-1940CN, FAX-2440C, FAX-2920, HL-2030, HL-2035, HL-2040, HL-2070N, HL-5240, HL-5240L, HL-5250DN, HL-5270DN, HL-5280DW, MFC-210C, MFC-215C, MFC-240C, MFC-3240C, MFC-3340CN, MFC-3360C, MFC-410CN, MFC-425CN, MFC-440CN, MFC-5440CN, MFC-5460CN, MFC-5840CN, MFC-5860CN, MFC-5890CN, MFC-5895CW, MFC-620CN, MFC-640CW, MFC-660CN, MFC-7225N, MFC-7420, MFC-7440N, MFC-7460DN, MFC-7820N, MFC-7840W, MFC-7860DW, MFC-820CW, MFC-845CW, MFC-8460N, MFC-8860DN, MFC-8870DW, MFC-9120CN, MFC-9320CW, MFC-9420CN, MFC-9460CDN, MFC-9465CDN, MFC-J430W, MFC-J5910DW, MFC-J625DW, MFC-J6510DW, MFC-J6710DW, MFC-J6910DW, MFC-J825DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.