HL-L9310CDW(T)

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 27/03/2017
  • ID: faq00000460_005

Factory Reset

Use the Factory Reset function to restore all settings back to the factory settings.

Unplug all the interface cables before you perform a Factory Reset.

  1. Press Settings (Settings) => All Settings => Initial Setup => Reset => Factory Reset.
  2. You will be asked to reboot the machine. Press the option in the table to reboot the machine or to exit the process.
    Option Description
    Press Yes for 2 seconds Reboot the machine. The machine will begin the reset.
    No The machine will exit without rebooting.

    If you do not reboot your machine, the reset process will not finish and your settings will remain unchanged.

  3. Press Home (Home).

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-L8360CDW, HL-L9310CDW(T)

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit