HL-5240
![]() |
FAQs & Troubleshooting |
The printer cannot print full pages of a document. An error message PRINT OVERRUN is printed out.
Please do the following:
-
Press Go to print the remaining data in the printer memory. Cancel the print job if you want to delete the remaining data in the printer memory.
-
Reduce the complexity of your document or cut the print resolution.
-
Set page protection to AUTO by using the supplied Windows® driver or Remote Printer Console program.
![](/g/b/img/faqend/faq00000402_001/gb/en/3316/page_protection.gif)
- Change the following settings in the Windows® printer driver, and then try again. The best combination of the settings below will vary depending on your document:
+Graphics mode
+TrueType mode
+Use printer TrueType® fonts - To change these settings, click 'Advanced' tab of the printer driver. Select 'Manual' in the 'Print Setting' section. Click 'Setting...'.
![](/g/b/img/faqend/faq00000402_001/gb/en/3317/setting1.gif)
Content Feedback
To help us improve our support, please provide your feedback below.