Model discontinued. This page is no longer updated.

HL-3450CN

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 08/11/2006
  • ID: faq00000315_002

How do I replace the waste toner pack?


Follow the steps below to replace the Waste Toner Pack:

 

  1. Open the Front Cover.

  2. Remove the Waste Toner Pack from the holder located at the lower right side of the printer.

     

    3. Be careful not to spill the toner.

  3. Peel off the sealing sticker on the right side of the Waste Toner Pack. Seal the opening with the sealing sticker. See the picture below for the correct placement of the sticker. When you dispose of the used Waste Toner Pack, place it in the plastic bag included with the replacement Waste Toner Pack. Please dispose of the Waste Toner Pack in accordance with local regulations.

     

  4. Insert the new Waste Toner Pack into the Waste Toner Pack Holder.

  5. Close the Front Cover.

     

    • DONOT put the Waste toner pack into a fire. It could explode.
    • Handle the waste toner pack carefully. If toner scatters on your hands or clothes, immediately wipe or wash it off with cold water.
    • Be careful not to spill the toner. DONOT inhale or allow it to get into your eyes.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-3450CN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit