DCP-8085DN

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I clean the scanner to improve the copy or fax quality?

Follow steps below:
NOTE: Illustrations shown below are from the representative product and may differ from your Brother machine.

 

  1. Turn off the machine's power switch. Unplug the telephone line cord first (for MFC users), disconnect all other cables and then unplug the power cord from the AC power outlet.
  2. Lift the document cover (1). Clean the white plastic surface (2) and scanner glass (3) underneath it with a soft lint-free cloth moistened with water.
  1. In the ADF unit, clean the white bar (1) and the scanner glass strip (2) underneath it with a soft lint-free cloth moistened with water.
  1. Plug the machine's power cord back into the AC power outlet first, and reconnect all other cables and telephone line cord (for MFC users). Turn on the machine's power switch.

 

In addition to cleaning the scanner glass and glass strip with a soft lint-free cloth moistened with water, run your finger tip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make a copy after each clean.

 

 
 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-8070D, DCP-8085DN, MFC-8370DN, MFC-8380DN, MFC-8880DN, MFC-8890DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.