Model discontinued. This page is no longer updated.

HL-5070N

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I clean the corona wire on the drum unit?

If you are experiencing print quality problems, please clean the corona wire as follows:

 

Do NOT use flammable substances or any type of spray to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock.

 
  1. Turn off the printer power switch, and then unplug the printer power cord.

  2. Press the cover release button and then open the front cover of the printer.

  3. Pull out the Drum unit assembly (drum unit with toner cartridge).

  4. Clean the primary corona wire inside the drum unit by gently sliding the blue tab from right to left and left to right several times. Return the tab to the home position (▲) before you put the drum unit back in the printer.

    Make sure to return the tab to the Home position. If you do not, printed pages will have a black vertical stripe.

     
  5. Put the drum unit assembly back in the printer.

  6. Close the front cover.

  7. Plug the printer power cord back in, and then turn the printer power switch back on.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-5030, HL-5040, HL-5050, HL-5070N

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.