MFC-8880DN

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 03/02/2009
  • ID: faq00000197_021

Can I reduce the size of a received fax so it fits on the size of the paper in the Brother machine?


  • Turning on Auto Reduction will automatically reduce the size of an incoming fax to fit the size of the paper in your machine. To set Auto Reduction mode ON, follow the instructions listed below:
  1. Make sure you are in Fax mode .
  2. Press Menu.
  3. Press the up or down arrow key to select Fax and press OK.
  4. Press the up or down arrow key to select Setup Receive and press OK.
  5. Press the up or down arrow key to select Auto Reduction and press OK.
  6. Press the up or down arrow key to choose ON (or OFF) and press OK.
  7. Press Stop/Exit.
  • The machine calculates the reduction ratio by using the page size of the fax and the Paper Size setting.
    Verify the Paper Size is set correctly by follow the instructions listed below:
  1. Press Menu.
  2. Press the up or down arrow key to select General Setup and press OK.
  3. Press the up or down arrow key to select Paper and press OK.
  4. Press the up or down arrow key to select Paper Size and press OK.
  5. Press the up or down arrow key to choose the tray and press OK.
  6. Press the up or down arrow key to choose the correct size and press OK.
  7. Press Stop/Exit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-8370DN, MFC-8380DN, MFC-8880DN, MFC-8890DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit