MFC-J5920DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Print the Network Configuration Report.

This report lists all the current network configuration settings, including the network print server settings.

 

  1. Turn your Brother machine on.
     
  2. Wait for 60-90 seconds for the machine to connect to the network.
     
  3. Press Settings (Settings).
     
  4. Press All Settings.
     
  5. Press the Up or Down arrow key to display Print Reports.
      
  6. Press Print Reports.
      
  7. Press the Up or Down arrow key to display Network Configuration. (This step might be skipped in some models.)
      
  8. Press Network Configuration.
     
  9. Press OK.
      
  10. Press Home (Home).

 

If the IP address does not get updated, make sure your Brother machine is correctly set up and connected to a wired or wireless network.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-J4120DW, MFC-J4420DW, MFC-J4510DW, MFC-J4620DW, MFC-J4625DW, MFC-J4710DW, MFC-J5320DW, MFC-J5620DW, MFC-J5625DW, MFC-J5720DW, MFC-J5920DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.