HL-4050CDN
 |
FAQs & Troubleshooting |
How do I adjust the print position of each colour?
There are two ways to adjust the print position of each colour.
If you want to perform the registration automatically, follow the auto registration instructions below.
If you want to perform the registration manually, follow the manual registration instructions below.
Adjusting the print position of each colour automatically (Auto Registration):
- Press + or - button to choose "Color Correction". Press OK.
- Press + or - button to choose "Auto Regist.". Press OK.
- Check "Registration" is displayed on the LCD. Press OK.
- Press OK again.
Now the print position of each colour is adjusted automatically.
If you want to set the interval time to perform the auto registration, do the following:
- Press + or - button to choose "Color Correction". Press OK.
- Press + or - button to choose "Auto Regist.". Press OK.
- Press + or - button to choose "Frequency". Press OK.
- Press + or - button to choose "Low","Medium", "High" or "Off".
"Medium" is configured as the default setting for the interval time. - Press OK.
Adjusting the print position of each colour manually (Manual Registration):
- Press + or - button to choose "Color Correction". Press OK.
- Press + or - button to choose "Manual Regist.". Press OK.
- Check "Print Chart" is displayed on the LCD. Press OK.
The colour registration chart will be printed. - Press + or - button to choose "Color Correction". Press OK.
- Press + or - button to choose "Manual Regist.". Press OK.
- Press + or - button to choose "Set Registration". Press OK.
- Set the colour registration referring to the instructions on the Color Registration Chart.
- After finishing all the instructions on the Color Registration Chart, press OK.
Now the print position of each colour is adjusted manually.
Content Feedback
To help us improve our support, please provide your feedback below.
