FS-40
 |
FAQ et Diagnostic |
When thread got tangled.
-
When a machine stops operation due to tangled thread, do not turn the pulley by force.
If the pulley is turned by force then, lower thread might not be picked up correctly and stitches might not be formed correctly.
- If threads get tangled, remove a needle plate and cut the tangled threads by scissors or cutter.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Modèles apparentés
BC-2100/2300, BC-2500, BM-3500/2600, CS10, CS120WT, CS70, CS-80, CS-8060, CS-8120, CX70PE, DS-120, DS-140, ES-2000, FS100WT, FS-20, FS-40, FS60, FS60s, FS70WT, FS70WTs, HF27, HF37, Innov-is 10/10A, Innov-is 100, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 1500D/1500, Innov-is 150SE/ 150, Innov-is 20/20LE, Innov-is 200, Innov-is 2200, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 350SE, Innov-is 400, Innov-is 4000D/4000, Innov-is 50, Innov-is 5000, Innov-is 500D, Innov-is 55, Innov-is 550SE/ 550, Innov-is 55FE, Innov-is 600, Innov-is 700E, Innov-is 750E, Innov-is 900, Innov-is 950, Innov-is 955, Innov-is I, Innov-is Ie, Innov-is V3, Innov-is V3 LE, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is VQ2, Innov-is VQ4, J14, J17, JS23, KD144, KD40, KE14, KE20, LS-1217, LS-1520, LS-1717, NX-200, NX-2000, NX-400Q/400, NX-600, PE-180D, PE-300S, PE-400D, PQ1600S, PS-3100/3700, PS-53/55/57, PX-100/200/300, QC-1000, RH127, RH137, RL417, RL425, STAR 110/130E, STAR 230E/240E, SuperGalaxie 3000/3000C/3000D/3100D, X14, X17, XL-2120/2220/2230, XL-2600/2610/2620, XL-3500/ 3510/3520, XL-3600, XL-5010/5020/5030, XL-5050/5060/5070, XL-6040, XL-6053/6063, XN1700, XN2500, XQ2700, XQ3700, XT27, XT37
