DCP-L2510D
|
FAQ et Diagnostic |
I cannot print or scan via USB on Fedora 38 or later and on their derivatives (Linux)
To be able to print or scan, do one of the following:
If you have one Brother machine
-
Make sure that the machine is turned on.
-
If you have already installed the Brother printer driver or scanner driver, uninstall them.
-
Connect the machine to your computer using a USB cable.
-
> Click here to download the patch file (4 KB)
-
Run the following command using the command line to install the downloaded patch:
sudo rpm -ihv brotherlegacyusb-1.1.1-0.noarch.rpm
-
Disconnect the USB cable from your machine, wait a few seconds, and then reconnect the USB cable.
-
Install the Brother printer driver or scanner driver again.
If you have multiple Brother machines
-
Make sure that the machines are turned on.
-
If you have already installed the Brother printer drivers and scanner drivers, uninstall them.
-
Connect the machines to your computer using USB cables.
-
> Click here to download the patch file (4 KB)
-
Run the following command using the command line to install the downloaded patch:
sudo rpm -ihv brotherlegacyusb-1.1.1-0.noarch.rpm
-
Disconnect the USB cables from the machines, wait a few seconds, and then reconnect the USB cables.
-
Install the Brother printer drivers and scanner drivers again.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.