HL-4200CN
![]() |
FAQ et Diagnostic |
Print on both sides of the paper.
The printer supports Automatic and Manual 2-Sided(Duplex) printing modes:
-
Automatic 2-Sided(Duplex) Printing (normal paper):
The printer can print on both sides of the paper For paper fed from a paper tray or the multi-purpose tray, 2-sided(duplex) printing is carried out automatically if you set this in the printer driver upon executing the print command.
To see how to set in the printer driver in detail, click here.
-
Manual 2-Sided(Duplex) Printing with the Multi-purpose Tray:
For thicker paper or glossy paper, you can print on the back surface of the paper from the multi-purpose tray. Print the front surface of all pages first, then put the sheets into the multi-purpose tray to print on the back surface of the pages.
If you use 2-sided(duplex) printing frequently in Windows we recommend that you register the necessary settings in the User Settings tab. Registering the settings saves you time, because you will not need to configure the driver each time you print.To see the detail, refer to the Related FAQ listed at the bottom.
There are two types of 2-sided(duplex) printing: long edge binding, and short edge binding. The results of printing with the two types are shown below:
F=Front, R=Reverse
-
Long Edge Binding
![](/g/b/img/faqend/faq00000073_000/eu_ot/en/90996/0564_01.gif)
-
Short Edge Binding
![](/g/b/img/faqend/faq00000073_000/eu_ot/en/90997/0564_02.gif)
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.