QL-800
Usein kysytyt kysymykset ja vianmääritys
Labels are jammed in the machine or are not ejected correctly after printing.
How to remove label jam:
Make sure that printer is turned off and disconnect the AC adapter.
Open the DK Roll compartment cover.
Remove any jammed labels.
Do not touch the cutter. Personal injury could result.
How to prevent label jam:
If a label causes the machine to jam due to adhesive residue attached to the label outlet, clean the label outlet with a cloth.
Use a slightly damp cloth if it is difficult to remove adhesive.
Check if there is dirt or lint on the roller preventing it from rolling freely.
Use a cleaning sheet to clean the roller.
For details, see "What are the cleaning sheets for? When do I use them?"
Check that the label output slot is not blocked.
Check that the DK Roll is installed correctly. If not, remove the DK roll and reinstall it.
For details, see "How do I install/change the label roll?" .
Check that the DK Roll compartment cover is closed correctly.
Check that the label is not damp.
Do not expose the DK Roll to high humidity.
Do not use the label that has been once peeled off by sticking it to the release paper.
It may peel off and get stuck in the printer.
Jos kysymykseesi ei vastattu, oletko tarkistanut muut usein kysytyt kysymykset?
Oletko tarkistanut käyttöohjeet?
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Aiheeseen liittyvät mallit QL-500, QL-500A, QL-550, QL-560, QL-570, QL-580N, QL-700, QL-710W, QL-720NW, QL-800, QL-810W/810Wc, QL-820NWB/820NWBc
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
Asennus Alkuasetukset Liittäminen tietokoneeseen Liittäminen mobiililaitteeseen P-touch Editor (Windows) P-touch Editor (Mac) Tulostus Mobiililaitteiden appsit Ohjelmisto Laite Käyttöjärjestelmä Hoito Asennus Ohjelmisto P-touch Editor (Windows) P-touch Editor (Mac) Virheilmoitukset/Merkkivalot Mobiililaitteiden appsit Liittäminen tietokoneeseen Tulostus Asennuksen poisto Laite Käyttöjärjestelmä Asennus Mobiililaitteiden appsit Hoito Tekniset tiedot
Ohjain Ohjelmisto
Laitteen asennus
USB
Numerointi Viivakoodit Asettelu Lisäohjelmat Tarramallit Tulostus Ohjelman käyttö Tietokanta
Numerointi Viivakoodit Asettelu Tarramallit Tulostus Ohjelman käyttö
Tulostuslaatu/Tulostusasetukset Hajautettu tulostus (vain Windows) Asettelu
Tulostinohjain Laiteohjelma Tulostinasetustyökalu P-touch Editor Lite P-touch Transfer Manager (vain Windows) P-touch Transfer Express
BRAdmin Professional
BRAdmin Light
Alkuasetukset Tulostusasetusten tulostus Tulostinasetustyökalu Virtalähde
Mac Windows Linux
Tulostinohjain P-touch Osoitekirja Tulostinasetustyökalu P-touch Editor Lite P-touch Transfer Manager (vain Windows)
Hoito
Tulostuslaatu Tulostusmateriaali Tietokanta Lisäohjelmat Viivakoodit Virheilmoitukset Käyttö
Käyttö Ei voi tulostaa Tulostuslaatu Tietokanta
Asennusongelma Ei voi tulostaa
Ei voi tulostaa Tulostuslaatu/Tulostusasetukset
Asettelu Paperi/Teippi/Tarra juuttui
Laite Virtalähde Alkuasetukset
Toiminnot
Laite Sovellus Kulutustarvikkeet ja lisävarusteet
Tulostinohjain P-touch Editor
Ohjelmisto
Ohjelmisto
Brother iPrint&Label
Merkkivalot Virheilmoitukset tietokoneen näytössä
Brother iPrint&Label
Mobiiliappsit Mobiililaiteappsien yhteensopivuus
Hoito
Brother iPrint&Label
Mac
Windows
Linux