QL-650TD
 |
Usein kysytyt kysymykset ja vianmääritys |
How do I reset the PS-9000 to factory default settings?
[Method 1]
-
Make sure that the AC adapter is not connected to the product.
-
While pressing the push button, connect the AC adapter to the product.
-
The STATUS LED (orange) will blink once when the power connection is made.
-
Hold down the push button for two seconds.
-
The STATUS LED (orange) will constantly light and the reset to factory default is completed.
-
Release the push button.
-
Do not turn off the PS-9000 while it is being initialized to the factory default settings.
-
When the PS-9000 is turned on again after being initialized to the factory default settings, do not press the push button.
[Method 2: using the Brother PS-9000 Utility]
-
Select PS-9000 in the PS-9000 setting dialog box of the Brother PS-9000 Utility.
-
Click [initialized].
Jos kysymykseesi ei vastattu, oletko tarkistanut muut usein kysytyt kysymykset?
Oletko tarkistanut käyttöohjeet?
Jos tarvitset lisäapua, ota yhteys Brotherin asiakaspalveluun:
Sisältöpalaute
Auta meitä parantamaan tukea antamalla palautetta alla.
